12
V.
WIRELESS COMMUNICATION
EU L-8 external controller may communicate with certain devices using radio signal:
Device
Function
How to configure
C-8-r – room temperature
sensor
Sending current room
temperature data
The sensor should be
registered in the external
controller
C- mini - room temperature
sensor
Sending current room
temperature data
The sensor should be
registered in the external
controller
R-8b -
two-state room regulator;
power supply: 2xAAA
1,5V
- Sending current zone
temperature data
- Adjusting pre-set temperature
directly from the zone
The room regulator should be
registered in the external
controller
R-8z -
two-state room regulator;
power supply: 230V
50Hz
- Sending current zone
temperature data
- Adjusting pre-set temperature
directly from the zone
The room regulator should be
registered in the external
controller
M-8 - master room regulator
(control panel)
- Sending current zone
temperature data
- Adjusting pre-set temperature
and schedule settings directly
from the zone
- Adjusting settings for different
zones
The room regulator should be
registered in the external
controller
C-8zr - external temperature
sensor
- Monitoring external
temperature value
The sensor should be
registered in the external
controller
STT-868 - wireless
thermostatic actuator
- Opening/closing the valve in
order to maintain desired
temperature value
The actuator should be
registered in the external
controller
