29
X.
OWN SCHEDULE SETTINGS
Once the schedule has been selected (Menu -> Zones -> Zone 1-8 -> Weekly control), the user may select, view and edit a
given schedule.
Schedule view screen:
1.
Time periods.
2.
Pre-set temperature for time perdiods.
3.
Pre-set temperaturę outside time periods.
4.
Days when the above settings will apply.
Follow these steps to configure a schedule:
Select the part of the week when the daily schedule will apply
(part 1 or part 2).
In order to assign days to a given part of the week, follow the
steps:
- Use arrows UP and DOWN to select <Assign days>. Press
MENU in order to edit.
- Use arrows UP and DOWN to switch between days. Confirm by
pressing MENU. Active days are highlighted in
white.
- In order to confirm the settings, press EXIT and select
<Confirm> and move on to editing daily schedule.
Use arrows UP and DOWN to select the pre-set temperature to apply outside the time periods. Confirm by pressing
MENU.
Use arrows UP and DOWN to select the starting time of the first time period. Confirm by pressing MENU.
1
2
3
4
