9
Step 2. Switch on the power supply and check if the devices work properly
Once all the devices has been connected, switch on the power supply.
Use the Manual mode function to check if each device works properly – use the buttons
▲
and
▼
to select the device and
press MENU button - the device should be activated. Follow the procedure to check all the devices.
Step 3. Activate the Internet module
EU L-8 external controller is compatible with ST-507 and WiFi RS.
WiFi RS uses WiFi wireless network whereas ST-507 needs to be connected to a router with RJ45 network cable.
Connection diagram for ST-507 Internet module.
Connection diagram for WiFi RS.
ST-507 Internet module or WiFi RS should be connected as illustrated in the diagrams above. Next, activate the module:
Main menu/Fitter’s menu/Internet module/ON. Further steps are described in detail in the instruction manual for the
Internet module.
