ATTENTION!
T
HE
LIVE
ELECTRIC
DEVICE
!
Before doing any activities connected with power supply (connecting wires,
installation of the device, etc) it is necessary to make sure that the regulator is not
connected to the grid!
Assembly and installation should only be carried out by qualified electrician.
Before activating the controller it is necessary to do the measurement of
effectiveness of resetting electric motors, a boiler and the measurement of
insulation of electric wires.
You mustn’t use any shut-off valves that shut off central heating water
circulation.
The regulator mustn’t work in closed system of central heating. There must
be mounted pop valves, pressure valves and expansion tank that protect the
boiler from boiling water in the central heating system.
The controller MUST be connected to the socket with earthing. While
connecting the controller you must do the measurement of effectiveness of
earthing. Cables cannot be exposed to temperature above 90°C. You must
isolate them from elements of the stove that can warm up to high
temperatures.
3
