ST-45 User's Manual
III.2.b)
Temperature Monitoring
In this function, you can set the temperature monitoring time for water
that is delivered downstream of the valve to heat the house. This means
that the temperature downstream of the valve is checked periodically. If
decrease of the temperature is detected, the valve will be opened by a
defined amount in order to heat up the house. The above principle also
serves the opposite purpose when there is a need of decreasing the
temperature.
III.2.c)
Opening Time
This function can be used for setting the opening time for the valve, i.e.
how long is it going to take for the valve to be fully opened.
-14-
REGISTRATION
Enter Module Number
C.H. VALVE
Calibrating valve
Please wait
VALVE
Exit
Registration
Temp Monitor
Opening Time
TEMP. MONITOR
seconds
OPENING TIME
seconds
