tech
>> Notification >> Time of next alarm >> [0÷300min]
In the case of selecting the value 0, the alarm cyclical
reminder function shall be inactive.
3) Operation mode:
The user has the possibility of selecting the type of incoming
information messages. In the menu
> > Operation mode
after selecting the option
>> independently
incoming sms information messages will contain only the data from
active contact and temperature sensors.
after selecting the option
> > with the controller
incoming sms information messages will contain data both from the
boiler controller and from active contact and temperature sensors.
4) Output activation
Each GSM controller by TECH company is equipped with one
output, which is placed in the first place from the left, looking at the
view on page 3.
The user may, at any time, by means of an SMS text message, activate
or deactivate this output.
Three output states are possible:
•
Constantly activated.
•
Activated for a specified time.
•
Deactivated.
In order to activate output "
Wyj
" in a continuous mode, send a
message in the format:
[pin authorization] [W]
[value]
[;]
e.g.
9999
W
1
;
-
11
-
