tech
5) Change and activation of emergency numbers.
Entering emergency numbers.
The user can, at any time, change the alarm number. The change can
be performed by means of an SMS message or from the menu of
module ST-65 GSM.
The user can, at any time, change the "authorization pin" by sending a
message to the module number in the format:
[pin authorization]
[n]
[value]
[;]
e.g.
9999
n
1
;
Namely:
9999 N1;
The messages of this type will change the first authorization number to
the telephone number from which the user has sent the SMS message,
and will send back an sms with controller working parameters. Sending
a message of this type is equivalent to a change in the menu of module
ST-65:
>GSM settings > Phone number> +1 <<<<<<<<<<<<or + 2
<<<<<<<<<<<<
Where, by means of up/down buttons, we select the telephone number
of our choice, with the Menu button we begin editing the selected phone
number.
The editing is divided into two stages:
•
Editing the number, where, by means of up/down buttons, we change a
particular number character. With the Menu button, we move to another
character. After entering the proper phone number, we press the EXIT
button.
•
The next stage is activating the number with up/down buttons, we
select whether the number is to be notified about alerts (Activate or
deactivate).
If the telephone number differs from the number introduced, the
user is asked to confirm the changes.
-
13
-
