tech
IV. SIM CARD
Module ST-65 GSM will not operate without a correctly inserted and
configured SIM card. In the case when the module detects no sim card, it will
switch to standby mode, waiting for a card to be inserted. The SIM card may
be inserted ONLY at the time when the controller screen displays the text:
"Insert the card
Press the button"
In the case of changing the sim card during module operation, use the
option in the module menu:
"Change the sim card"
After selecting this option, the module will switch to standby mode, waiting
for the card to be changed, wait for a message (as above). To insert the card,
unscrew four fixing screws and open the casing.
-
5
-
MENU
CHANGING
THE SIM CARD
NOTIFICATION
GSM SETTINGS
WITH THE
CONTROLLER
INDEPENDENTLY
OPERATION MODE
INSERT
THE SIM CARD
TELEPHONE NUMBER
SIM CARD PIN
NOTIFICATION
NO SUPPLY
ACTIVATED
AUTHORIZATION PIN
TIME OF NEXT
ALERT
SENSORS -
SETTINGS
CONN. T1 SETT.
CONN T2 SETT.
YES / NO
[1234]
YES / NO
1 ÷ 300min, 0-off
T1 on/off
(Active, Inactive)
T2 on/off
(Active, Inactive)
TEMP. MAXIMUM
TEMP. MAXIMUM
TEMP. MINIMUM
TEMP. MINIMUM
CONF. INPUTS
CONF. INPUTS
(Active, Inactive)
ALARM WHEN...
(Short-circuit, Opening)
NAME...
[<<<<<<<<<<]
CONF. OUTPUTS
OFF BY DEFAULT
ON BY DEFAULT
LANGUAGE
ENGLISH
POLISH
+1<<<<<<<<<<<<
+2<<<<<<<<<<<<
