ST-707 Rotations Control
thermoregulator operation screens. They are:
➢
CH screen (the current boiler operation mode is displayed),
➢
valve 1 (displays the operational parameters of the first valve),
➢
valve 2 (displays the operational parameters of the second valve).
➢
manufacturer's screen - this view is unavailable to the user. This is
a special screen view only for the device's manufacturer.
NOTE
To make the views with valve parameters active, these valves must be
earlier accordingly installed and configured by the installer.
II.4. Ignition
The boiler can be easily kindled using this function. After initial
lighting up of a fire source, the user activates the automatic ignition
cycle. Thanks to selection of optimum parameters, the boiler will
smoothly switch to the operation mode using the PID function.
II.5. Set CH
This option is used to adjust the set boiler temperature. The user may
change the temperature range in the boiler from 45
O
C to 80
O
C. The set
CH can also be changed directly from the main controller screen by
turning the pulse generator knob.
II.6. Set HUW
This option is used to adjust the set value of the hot utility water
temperature. The user may change this temperature in the range from
40
O
C to 75
O
C.
- 9 -
