24
length conversions. See the following to set
a personal profile
HOLD
MODE
FOR 3 SECONDS
in the Home
Time display to access the Main Settings
Menu
• PRESS
ST/STP
or
LAP/RESET
to scroll
to Personal Profile:
8 of 11
• PRESS
ST/STP
or
LAP/RESET
to adjust the
hour. Check whether the hour is for AM or PM
• PRESS
MODE
to confirm
• PRESS
ST/STP
or
LAP/RESET
to adjust the
minutes
• PRESS
MODE
to confirm
• PRESS
ST/STP
or
LAP/RESET
to adjust the
seconds
• PRESS
MODE
to confirm
HOLD
MODE
FOR 3 SECONDS
to return to the
Main Settings Menu
HOLD
MODE
FOR 3 SECONDS
to return to the
Home Time display
Personal Profile: 8 of 11
See fig.28
Taking 5 minutes to determine your personal
profile measurements is key to enjoying your
Accelerator watch. Most important is determining
your average stride lengths. The greater the test
distance, the more accurate your data will be. A
distance of 100m or 300ft is sufficient for proper
calibration. This distance is easy to measure at
a local running track, as it is the length of one
straightaway. Use the online stride calculator at
www.tech4o.com for help with various stride
fig.28