TS8200D Series
Micro-Meter Mix Quick Start Guide
______________________________________________________________________
______________________________________________________________________
1.
INSTALLATION
Required tools: 8
mm (5/16”) wrench
; 3.0 mm hex wrench; 2.5 mm hex wrench;
2.0 mm hex wrench
Warning!
Do not dry-assemble the rotor and stator. Excessive friction between dry
components may damage stators and effect pump performance.
a.
Apply the dispensing fluid or any appropriate lubricant compatible with the
dispensing fluid to the surface of the rotor.
TS8200D Series Micro-Meter Mix
True volumetric measuring, mixing, and dispensing
of 2-component materials
