26
6. TROUBLE SHOOTING
1. The System cannot Reset after Booting.
Emergency switch error
Check the Emergency switch is not pressed, by mistake.
2. Z axis or X and Y axis cannot be Positioned Accurately in Processing
1) Loss of steps will cause inaccurate positioning phenomenon.
Overload, excessive speed or acceleration, insufficient power supply, or mismatched motor drive would lead to
the loss of steps. Please check the overload and the parameters settings. If the inaccurate positioning
phenomenon disappears or remits after reducing the speed or acceleration, we can make sure the phenomenon
is caused by the motor loss of steps. If inaccurate positioning phenomenon is very obvious for one axis, reduce
the acceleration of the axis.
2) Operation Error will cause inaccurate positioning phenomenon.
Do not reset when the work done
Make the system reset automatically after each accumulated processing error has been eliminated,)
7. WARRANTY
Manufacturer warrants this product to the original purchaser for a period of one (1) year from date of purchase to
be free from defects in material and workmanship, but not against damages by misuse, negligence, accident, faulty
installations and instructions. Manufacturer will repair or replace (at factory’s option), free of charge, any
component of the equipment thus found to be defective, on return of the component, “PREPAID” to the factory
during the warranty period. In no event shall any liability or obligation of the Manufacturer arising from this
warranty exceed the purchase price of the equipment. This warranty is only valid if the defective product is returned
as a complete assembly without physical damage. The Manufacturer’s liability, as stated herein, cannot be altered
or enlarged except by a written statement signed by an officer of the company. In no event shall the Manufacturer
be liable for consequential or incidental damages. A return authorization is required from Techcon Systems prior
to shipping a defective unit to the factory.
Manufacturer reserves the right to make engineering product modifications without notice.
All returns must be issued with a Returns Authorization number, prior to return. Send warranty returns to:
Bergdahl Associates, Inc.
Reno, NV 89512-1616
phone: +1 775 323-7542
www.bergdahl.com