3
3D
5
Stake the fixture to the desired location and properly
bury the wire and wire nut connections.
Install the Fixture to Concrete
(or other hard surfaces)
1
2
Bring the power wires to the fixture location in
accordance with local electrical codes.
Mount the base plate to an even and smooth surface
using the template provided on last page. Ensure that
length of the lag bolts or anchor bolts do not exceed
0.66” from the mounting surface in order to leave
enough clearance for the fixture to fit properly over the
base plate.
1
2
BASE PLATE
4A
0.66”
FIXTURE
BASE PLATE
3
4
3
4C
Connect the white driver wire to one of the low-voltage
power line wire with a wire nut.
Connect the black fixture wire to the remaining low-
voltage power line with a wire nut.
4
Carefully place the power line/cord inside the fixture,
install the fixture onto the base plate, and secure it in
place by tightening down the set screws.
5
4D
5
SET SCREW
5
ALLEN
WRENCH
