22
TL-CAV-01-HD User Manual
www.tlnetworx.com
Select the desired update file and press Apply, it will start upgrading then.
4.7
Copy and load configuration data
The system IR or RS232 configuration can be copied to a USB thumb drive and loaded
into additional systems or be saved as a backup.
4.7.1
Copy Configuration Data
1)
Insert a 4GB or smaller FAT32 formatted thumb drive into the CONFIG port on
Control Panel.
2)
Press “
HDMI 2
”+“
OFF
” simultaneously for three seconds on Control Panel. As
soon as the buttons are released, they will light up while the copy is progress.
3)
Remove the thumb drive from the CONFIG port once the buttons go dark.
4.7.2
Load configuration data
1)
Insert a 4GB or smaller FAT32 formatted thumb drive with saved
configuration data into the CONFIG port on Control Panel.
2)
Press “
HDMI 1
”+“
ON
” simultaneously for three seconds on Control Panel, the
blue backlight of buttons will go out while import successfully.
3)
Remove the thumb drive from the CONFIG port once the buttons go dark.
4)
Enter the Command Menu via Web GUI, the loaded RS232 commands will be
shown, and then press “
Save
’’ to confirm them.
