en
dear CusToMer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
1. InTroduCTIon
The 1 by 4 HDMI TV Wall support CVBS/VGA/HDMI/USB play input sources
to be freely arranged on 4 displays. The embedded scaler converts signals
from the input sources to match the native resolution of monitors, flat
panel displays, projectors as well as user-selectable output settings up to
1920x1080. All the operation and control can be done through IR, Ethernet
and RS-232.
The HDMI TV Wall is widely used in KTV, hotels, bars, leisure centers, shopping
malls, television stores ,cinemas, products display, media advertising,
building, education and training, Brand stores, airports, subway, etc.
2. feaTure
• Compliant with HDMI1.3a, DVI1.0;
• Output source signal to 4 displays (2 by 2 Video wall) as a full image with
adjustable Bezel Correction;
• Supports IR, Ethernet and RS232 controls;
• Supports cascade to 9 dispay(3 by 3 video wall) mode;
• Supports CVBS/VGA/HDMI input and USB movie, picture and music
playback;
• Advanced video de-interlaced for improving 480i and 576i SD video input;
• Support input formats:
- CVBs: PAL, NTSC, SECAM with stereo audio input;
- VGa:
640x480@60Hz, 800x600@60Hz, 1024x768@60Hz,
1280x1024@60Hz, 1280x720@60Hz, 1360x768@60Hz, 1440x900@60Hz,
1680x1050@60Hz, 1920x1080@60Hz with stereo audio input;
- hdMI: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576i/p,480i/p,
640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x1024@60Hz,
1280x720@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1680x1050@60Hz,
1920x1080@60Hz;
- usB: MPEG, H.264, RM/RMVB movie decode, JPEG, BMP, PNG Picture
decode and MPEG1/2, MP3 audio decode;
• Support output resolution up to 1080p60;
• Perfectly as a video screen splitter, a video converter and a video switcher;
3. paCKaGe ConTenTs
• HDMI 1 x4 TV Wall
1pc
• 12V/2.5A DC power adaptor
1pc
• Operation Manual
1pc
• 38KHz IR Receiver cable
1pc
• TV Wall Remote
1pc
• RS232 cable
1pc
4. speCIfICaTIon
Video Bandwidth
225MHz/6.75Gbps
Input ports
1x HDMI (Female type),
1xUSB, 1xVGA,L/R
Output ports
5 x HDMI (Female type) ,1xCoaxial, 2xL/R
HDMI Cable Distance
15M/8-bit 1080p
ESD Protection
Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
discharge)
Power Supply
12V/2.5A DC (US/EU standards, CE/FCC/
UL certified)
Dimensions (mm)
118mm(W) X 250mm (D) X 32mm(H)
Weight (g)
1050 g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature
-20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity
20~90% RH (non-condensing)
Power Consumption
7.5W
5. panel funCTIons
5.1 front panel
1) power Button: Press this button to power the device on/off.
2) power led: The LED will illuminate green when the power is on, red when
it is in ‘Standby’ mode.
3) Ir: IR Receiver window (accepts the remote control signal of this device
only).
5.2 rear panel
1) Control part
• TCp/Ip: This port is the link for TCP/IP controls, connect to an active
Ethernet link with an RJ45 terminated cable.
• rs232: Connect to a PC or control system with D-Sub 9-pin cable for the
transmission of RS-232 commands.
• Ir eXT: if the panel sensor is obstructed or the unit is installed in a closed
area out of infrared line of sight, the IR RX receiver included can be inserted
into the IR EXT port at the rear to extend the IR sensor range and enable
local control of the TV Wall.
2) output
• hdMI ouT: Connect with HDMI TV/displays for output image display. It
is suggest that the connection sequence should be placed as diagram
showed for TV wall set up. loop ouT is the nominated port for cascading
the input signal.
• audIo ouT: The coax and audio out where you connect to the digital or
analog audio amplifier.
3) Input
Connect with source equipment such as DVD/Blue-ray players, PC, Game
console or USB disc devices to CVBS, VGA, HDMI, USB input port.
HDMI 1x4 TV WALL
QUICK INSTALL GUIDE
WWW.TECHLY.COM
5
In conformità alla normativa WEEE, le apparecchiature elettriche
ed elettroniche non devono essere smaltite con i rifiuti
domestici. Il presente prodotto deve essere consegnato ai punti
di raccolta preposti allo smaltimento e riciclo delle apparecchiature
elettriche ed elettroniche. Contattate le autorità locali competenti per
ottenere informazioni in merito allo smaltimento corretto della presente
apparecchiatura.
Con il marchio CE, Techly® garantisce che il prodotto è conforme
alle norme e direttive europee richieste.
