1. IntroductIon
Dear Customers,
Thank you for choosing a Techly product. This user’s manual provides information for following LED Floating Ball Lamps:
Carefully read all instructions before using and keep this user's manual for future consultations.
2. WarnIngs and cautIons
• The charger and remote control are not waterproof and must be kept in a dry location at all times.
• Never charge the product in a pool, water or rain; charge in a dry, indoor location.
• Disconnect the charger from main power when not in use.
• Keep the power adapter out of the reach of the children.
• Do not stand or jump on this product.
• Do not sit on this product if it is cracked or damaged.
• Keep the product away from chemicals and heat.
• Do not attempt to open the product to avoid the risk of electric shock, opening the product could cause the loss of closely
sealed; opening the product would void the warranty.
• For charging use only the power adapter supplied into the package.
• Avoid prolonged stay in the water or in full sun.
3. specIfIcatIon
ambient temperature for operation
-14˚ C to 35˚C
Led
RGB LED 5050 SMD
Battery
3.7V 2000mAH
remote control battery
CR2025 (3V)
remote control effective distance
4-8 meters
charging time
4 to 6 hours depends on power supply
Working time
6-12 hours depends on color mode
charger
Input: AC 100~240V Output: DC7.5V 0.6A
4. operatIon
4.1 charging your new product
Before using the products, you need to charge the product for 6 to 8 hours. Following the information for charging:
• Plug charger into “DC charging port” of wireless charging plate as shown in below Photo of “Wireless charging plate”.
• Connecting the charger to the electrical outlet (the charging indicator light shown in photo of “Wireless charging plate” will light
up red to indicate that charging is working until it turns to green after fully charged). Unplug the charger from the power outlet
once charging is complete.
• Before starting to charge, be sure that the base of led lamp is perfectly dry.
When the LED light turns to green the battery is fully charged and the LED lamp is ready to use.
MULTICOLOR
LED LAMP
EN
WWW.TECHLY.COM
I-LED HALFB
I-LED BALL-M
I-LED BALL-L
