Techmade TECH SMART POCKET 280, Manual

Precautions of using battery

1> Switch off the phone before removing the battery. 

2> Use the battery carefully. It will cause short circuit to connect the anode (+) and cathode (-) of the

battery with metal objects (coin, clip, etc.), and damage the battery and metal objects. When the

battery is removed and put in the bag, do not contact the anode and cathode of the battery with

metal objects (e.g. keys). 

3> Do not put the battery in fire, or use in any place with high temperature. 

4> Do not disassemble or re fit the battery. 

5> Do   not   put   the  battery   in  the   place   with  strong   mechanical   impact  or   break  through  with   hard

object. 

6> Store the battery in cool and dry place, and avoid high temperature (> 60°C) and direct sunlight. 

7> Stop using if there is any particular smell or overheating. 

8> Stop using the battery if there is any crack, distortion or electrolyte leakage. 

9> If the electrolyte stains the skin or clothes, please wash with soap and clean water immediately; the

electrolyte enters the eyes, wash with clean water immediately and go to see the doctor. 

10>Do not use the battery in low temperature, in which the battery can’t get the maximum standby/call

time. 

11>

Do not wash the battery with water or organic solvent, or put it in water. 

12>

Fully charge the battery if it won't be used for a long time. 

13>

You are recommended to return wasted batteries to the manufacturer of mobile phone or put

them in the speci fied public recovery area of wasted batteries. Do not put them together with other

garbage or dispose casually. 

Using 3-in-1 charger (c data cable + earphone port)

The 3-in-1 charger may charge the battery through the mobile phone. 

1> Connect the data cable and charger 

2> Connect the data cable of the 3-in-1 charger to the I/O slot of the mobile phone. 

3> Connect the charger plug of the 3-in-1 charger to the appropriate power outlet. 

4> During charging, the icon of battery status blinks until the charging completes. 

5> After charging, the battery icon stops flashing, and you can pull out the 3-in-1 charger. 

Note: If the battery voltage is too low and can’t turn on the mobile phone, the charging icon may

appear on the screen after several minutes. The mobile phone may be turned on or off during

charging. 

Warning: Make sure that the local voltage and power match the rated voltage and power of the 3-

in-1 charger.

Switching on/off

1> Press and hold the End key to switch on the mobile phone. The screen shows the power on video. 

2> If the phone lock is activated, please input the password and press “OK” key. The default password

is 1122. 

3> If the PIN code is activated, please input the code and press “OK” key. The PIN code is provided

11