background image

Write message

You can enter this function menu to write short messages.

Short   message  is   a   network   service.   To   send   or   receive   short   messages,   you   may   need   to

subscribe   for   this   service   from   your   network   operator.   The   short   messages   are   sent   to   the

message center and then to the recipients (GSM subscribers). The short messages are saved in

the network  if the mobile phone of recipient isn’t switched  on or can’t receive short messages

(memory is full). The validity depends on user’s settings and network operator. With SMS, you can

send and receive chain text messages, which may affect the charge of messaging. Please contact

your network operator for details. 

Each message may contain 160 characters. While editing the message, select the “Input method”

option.

Press # key to switch the input method. 

Press the right soft key to delete one character before the cursor, or hold right soft key long to clear

all characters;  press  the End key to return to standby  mode; When  writing  messages,  you can

insert number, name and bookmark in editing message.

When   the   editing   message   is   finished,   you   can   press   direction   up/down  key  to   option:  enter

recipient or select contacts from phonebook or call history to send.

This mobile phone supports group messages with more than 600 characters each (the characters

limit of common text message). If the message contains more than limited  characters, the phone

sends it in two or more messages.

If the memory is full, an icon will flash in the top line of the screen; since the mobile phone supports

dual SIM cards, the messages are saved in  SIM1  and  SIM2  separately, and the prompts appear

separately. To receive new messages normally, delete the short messages in corresponding SIM

cards. If the recipient has received the message, the mobile phone sends an alert tone of message

report (report is enabled)

Note: When you send message via SMS service, the mobile phone may display “Sent”. It indicates

that the message has been sent to the SMS center. But it doesn’t mean that the recipient has

received the message. Contact your network operator for more information. 

Inbox

You   can   read   the   received   short   messages   in   the   Inbox,   including  SIM1  messages   and  SIM2

messages. Press left soft key of options in messages list interface, you can perform the following

operations:

View: View the info of the message.

Reply: Reply in text message by SIM1 or SIM2. 

Call sender: Call the sender by SIM1 or SIM2.

Forward: Forward the message to another contact by SIM1 or SIM2. 

Delete: Delete the message. 

Delete all: Delete all the messages in the Inbox of corresponding SIM cards; if SIM1 is selected. 

Save to Phonebook: Save the sender’s number to phonebook of SIM1/SIM2/phone.

18

Summary of Contents for TECH SMART POCKET 280


































Reviews: