FM Radio
For better signal reception, please insert Line–IN cable into ANT connector to
use it as an antenna. Press “MENU”, choose FM Radio mode, after entering
the FM mode press “MENU” again and select auto searching (Default setting
is auto searching and save.).
Press
to select different radio stations after searching.
Short press
to adjust frequency. Long press
to manual search
for the next radio station.
Short press VOL–/VOL+ to decrease or increase volume. By pressing
“MENU” long you can mute the device and to unmute press “MENU” long
again.
DAB Mode
Insert Line-IN cable as antenna into ANT connector before operating. Long
press
to search station after entering DAB mode.
Short press
to choose station and confirm by pressing “MENU”.
Short or Long press VOL–/VOL+ to adjust volume. Long press
to mute.
Press
to switch the seen information of the current channel.
Press long on “MENU” to get back to the main menu.
LINE–IN Mode
Plug one end of 3.5mm Line–IN cable into Line–IN connector, screen
showing
, and the other end into
connector of PC or CD to listen
to music.
Under Line–IN mode, only VOL–/VOL+ work. When Line–IN cable is plugged
out, speaker returns to main interface automatically. By pressing “MENU” you
can mute the device but the song plays along, because it is coming from an
external device.
