Note:
If you are too close or too far from the target, the quality of the
photos or videos will not be optimal. Stand at a distance between 100
and 1000 meters from the target. If you are within 100 meters of the
target the framing may be distorted and the photo or video will be slightly
shifted downwards.
Starting up
Press the On/Off button (3) for 2 seconds to start up the device. The red
LED blinks two times. The device is now in the standby mode. In standby
mode the red LED and the blue LED blinks alternately (with a cycle of 2
seconds).
Insert MicroSD card
Insert the MicroSD card into the
MicroSD card slot (5).
If the detection of the MicroSD
card fails or there is not enough
storage, the red LED shines
continuously and the blue LED
blinks 8 times, then the device
shut down.
Note:
Proper operation cannot be
guaranteed for all memory cards.
Video recording function
Briefly press the video button (4). The device starts video recording.
During the recording process the blue LED blinks and the red LED turns
off. For stop video recording repress the Video button (4). Now the
device is back into the standby mode and the video file is saved.
Note:
If
the MicroSD card does not have enough remaining space, the red LED
keeps shining and the blue LED blinks 8 times, then the device turns
power-off.
Photo function
Press the Camera-Shutter button (3). The device makes a photo. The
blue LED and the red LED blinks simultaneously. The device saves the
photo and turns to standby mode.
