14
3. When the pairing is successful the “BT Mode” on the display of
the device will stop blinking.
4. Now you can transfer the music to the “Technaxx TX-102” and all
operations can only be operated from your mobile device.
Note: Some Bluetooth devices can be controlled by TX-102 with
Play/Pause, Skip+ and Skip–.
USB MODE
playback from USB
1. Insert the USB flash drive into the USB port of the device.
2. Press MODE (7) [5 remote control] repeatedly to select USB
mode.
3. The device will start reading the device automatically after the
connection.
Press SKIP+/– (15/16) [12/13 remote control] to select your
favorite tunes. If you hold SKIP+/–, the playing track will go fast
backward or forward until you release the button.
Press PLAY/PAUSE (13) [9 remote control] to pause the
playback. The track number will start blinking. Press PLAY/PAUSE
(13) again to resume the playback.
Press STOP (14) [6 remote control] to stop the playback.
Delete USB
1. During playback, press and hold REC (17) [4 remote control].
“DEL” will be shown on the display.
2. Press SKIP+/– repeatedly to select between ONE/FOLDER/ALL.
3. Press REC again to confirm. To stop the process press STOP.
