Setting Wlan and APP
Open the Wifi setting of your iOS/Android device to find the WiFi hotspot
(unencrypted) with the prefix of “Cam-XXXXXX”. Click it to connect the
device with your smartphone and return to the main interface of the
iOS/Android device after successfully connected.
Taking pictures
1. Zooming: Turn the focus wheel until you reach the personal best view
option. Note: If the autofocus
doesn’t focus the object automatically, turn
the focus wheel slightly up and down.
2. Press the camera button on the WiFi Microscope or press the camera
icon in the APP.
Note: To save the pictures you have to be connected via the APP to a
device which is connected to the Microscope or with a PC while using the
PC software.
Recording video
1. Zooming: Turn the focus wheel until you reach the personal best view
option.
2. Press and hold the camera button on the WiFi Microscope at least 3
seconds or tap the video icon in the APP to start capture a video.
3. Finish recording by pressing the video button in the APP again or hold
the camera button on the WiFi Microscope for 3 seconds.
Set the LED brightness
To change the LED brightness, press the power button once.
It changes the brightness to a higher level. The WiFi Microscope has 4
different brightness level.
To turn the light off press the power button 4 times. The next press on
the power button will turn on the LED at the first brightness level.
Resolution in photo and video mode
Swipe in the APP to the left side to open the menu to change the
resolution settings.
Photo / Video
Resolution
Set the resolution to 1920x1080 / 1280x720 or
640x480
