background image

 

 

 

 

                                                                                              2 

 

Keep this device dry. 

 

For indoor use only. Not designed for outdoor use. 

 

Use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the 

rated voltage. 

 

Always unplug your fog machine before filling its fluid tank. 

 

Keep fog machine upright. 

 

Turn off or unplug when not in use. 

 

This machine is not water or splash proof. If moisture, water, or fog liquid gets inside the housing, immediately 

unplug the unit and contact a service technician or your dealer before using it again. 

 

No user serviceable parts inside. Refer to your dealer or other qualified service personnel. 

DANGER OF BURNS 

 

For adult use only. Fog machine must be installed out of the reach of children. Never leave the unit running 

unattended. 

 

Never aim the output nozzle directly at people. 

 

Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation. 

 

Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee adequate 

ventilation, allow a free air space of at least 20-cm around the sides and top of the unit. 

 

Never aim the output nozzle at open flame. 

 

The output nozzle becomes very hot during operation (300 degrees C). Keep flammable materials at least 50 

cm away from the nozzle. 

 

Always allow your fog machine to cool down before attempting to clean or service it. 

DANGER OF EXPLOSION 

 

Never add flammable liquids of any kind (oil, gas, perfume, alcohol) to the fog  liquid. Pay attention to all 

warning labels and instructions printed on the exterior of your fog machine. 

 

Use only the high-quality, water-based fog liquid that your dealer recommends. Other fog liquids may cause 

clogging or “spitting”, which could also cause slippery floors.  Techni-Lux, ELITE Fogging Waterbased fluids 

are highly suggested. 

 

Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause 

damage to the pump as well as over-heating of the heater. 

 

If your fog machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, 

pack the unit securely (preferably in the original packing material), and return it to your dealer for service. 

 

Always drain tank before mailing or transporting this unit. 

 

Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or 

eyes, rinse thoroughly with water. 

UNPACKING & INSPECTION 

Open the shipping carton and verify that call equipment necessary to operate the system has arrived intact, refer to 

“features” section for information on what items are included with your model. If any equipment is missing contact 

your dealer immediately. 

 

Before beginning initial setup of your fog machine, make sure that there is no evident damage caused by 

transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt to use it 

Summary of Contents for FM-9

Page 1: ...types of water based fog fluid formulas The fluids used must be compatible with this machine Never use in a confined or non ventilated area THIS MACHINE IS DESIGNED TO USE WATER BASED FOG FLUID ONLY Specifications MODEL FM 9 FM 10 VOLTAGE 110V 125V 60Hz 110V 125V 60Hz POWER 1000W 1500W FUSE 10A 125V 15A 125V WARMUP TIME 5MIN 15MIN SPRAY DISTANCE 5M 10M OUTPUT 15000 cuft min 25000 cuft min TANK CAP...

Page 2: ...or service it DANGER OF EXPLOSION Never add flammable liquids of any kind oil gas perfume alcohol to the fog liquid Pay attention to all warning labels and instructions printed on the exterior of your fog machine Use only the high quality water based fog liquid that your dealer recommends Other fog liquids may cause clogging or spitting which could also cause slippery floors Techni Lux ELITE Foggi...

Page 3: ...CONTROL OPERATION If your model includes a mounting bracket designed for overhead installation it may be installed at floor level or suspended overhead If the unit is to be mounted using the bracket it is important that the fog does not shoot directly at anyone s face Whatever installation method you choose do not allow the unit to have more than a 15 degree angle of inclination Important Always m...

Page 4: ...id container and the fog machine liquid tank immediately after filling After every 40 hours of continuous operation It is recommended to run a cleaning solution composed of 80 distilled water 20 white vinegar through the system to prevent the accumulation of particulate matter in the heating element The recommend cleaning regimen is as follows 1 While unit is unplugged and cool if removal nozzle t...

Reviews: