4
•
To use the FM-10 machine via DMX, set the start address on the remote digitally. It uses 3 channels of
standard DMX protocol to control its functions. Connect DMX to machine via the DMX IN 3-pin XLR
connector located on the back of the unit. Pass thru DMX out is provided via 3-pin XLR also.
DMX CHANNELS:
DMX VALUES
>> FUNCTION
Ch. 1
Duration (the on time)
0-10
>> Off
11-240
>> Long to Short
241-255
>> Full "ON" Bump at 100%
Ch. 2
Output Volume
0-255
>> Low to Maximum
Ch. 3
Interval (cycle time)
0-255
>> Short to Long
FM-9 using remote ZC-4
•
ZC-4: 10 meter wired timer remote on FM-9, provides the ability to set different cycle times. Both the
interval and duration may be adjusted using the two turn buttons. It can operate in automatic timer mode or in
manual mode. Connection of remote is via a 5-pin DIN connector located on the back of the unit.
Cleaning your fog machine regularly will help reduce costly part replacement and repair
charges and prolong its life.
Maintenance
Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid container and the
fog machine liquid tank immediately after filling.
After every 40 hours of continuous operation. It is recommended to run a cleaning solution composed of 80%
distilled water 20% white vinegar through the system to prevent the accumulation of particulate matter in the
heating element. The recommend-cleaning regimen is as follows:
1.
While unit is unplugged and cool, if removal nozzle type, unscrew nozzle at very front of unit and clean out
debris with vinegar and a pipe cleaner, making sure that the hole is free of any clogging.
2.
Empty all fog fluid from machine. Rinse tank with clean water. Add above cleaning solution to tank. Plug unit in
and begin warm up.
3.
Run unit in a well-ventilated area until tank is empty.
4.
Replace nozzle.
5.
Cleaning is now complete, refill with fog liquid.
Notes
: All fog machines are prone to clogging due to the thick consistency of fog fluid and the high temperature
at which it vaporizes. However, a properly maintained fog machine should provide an extended term of reliable use.
Keeping the fluid container clean will also help prolong fog machine life.
Clean with a dry cloth only.
Store in dry place. Before storing for a long period of time, run distilled water through it.
Save these instructions.