Hybrid Series
Front Panel
1.Power:
Press this button to power the unit on and off.
2.MP3(1/8”) Input:
Connect your MP3 player or computer here.Make sure to press the input selector button (5)
until “MP3” appears on the display screen to play the signal from the MP3 player or computer.
3.Play / Pause / Record Button:
When the input selected is USB/SD/Bluetooth, press this button to pause
the signal from the USB flash drive,SD card,bluetooth or iPod™(Classic and Nano) connected to the
USB input. Press this button again to play.The play/pause function will only work for the USB flash drive,
SD card, bluetooth or iPod™(Classic and Nano).
THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS USB/SD/BLUETOOTH.
When the input selected is TUNER/MP3/DVD/CD/VCD and there is an USB flash drive or SD card (with
blank space on it) inserted into their respective slot, pressing and holding this button will activate the
recording function.Press this button and hold for several seconds and the word “REC” will display on the
screen.The unit will create a new file in the connected USB flash drive or SD card and get ready to make
a recording. At this point there is no actual recording yet. Press the button again and the unit will start
recording onto the USB flash drive or SD Card and the elapsed time and “REC” will display on the screen.
Press the button a third time to pause the recording and the word “REC” and the elapsed time displayed
on the screen will start flashing. Press again to continue the recording. Press and hold this button for
several seconds to save the file and end the recording and exit. If both USB flash drive and SD card are
connected, the unit will begin recording onto the USB flash drive. If the USB flash drive is full, remove it
and then press the record button again to start another recording. The unit will also be able to record the
signal from microphone onto the USB flash drive or SD Card. When the recording funcion is activated
and there is a microphone connected and have it turned on, the unit will mix the signal from Tuner,MP3
or DVD with the microphone’s into one track.If two microphone are connected and turned on,both signals
from them will be recorded and mixed into one track with the signal from Tuner, MP3 or DVD.
THE RECORDING FILE FORMAT IS .WAV.
4.Repeat and Random Control:
Press this button to repeat the current track, all tracks or play random
tracks on the USB flash drive,SD Card or iPod™(Classic and Nano).The unit’s default setup is repeating
all tracks. Press this button once to repeat the current track, press again to play random tracks, press
three times to repeat all tracks.In tuner mode to save a specific frequency (station), go to the station and
then press the “RPT/RDM” button on the face of unit or the “RPT” key on the remote control and then
using the number keys on the remote enter a number for the saved station. The number entered should
be between1 and 30. After entering the numbers, press the “RPT/RDM” button or “RPT” key again to
save. And the unit will exit the scan and play the station stored.
Hybrid Series
1
2
16 17 18
19
21
22
23
24
20
11
4 5 6 7 8 9
10
3
12
13
14
15
