Hybrid Series
Remote
Hybrid Series
1.Play/Pause:
Press this button to pause the signal from
the USB flash drive,SD Card or iPod™(Classic and Nano)
or bluetooth signals,press again to play. This button will
only function for the USB flash drive,SD Card, iPod™
(Classic and Nano) or bluetooth signals.
2.Stop:
Press this button to pause the signal from the USB
flash drive,SD Card or iPod™(Classic and Nano) signals,
press again to play. This button will only function for the
USB flash drive,SD Card, iPod™(Classic and Nano)
signals.
3.Mute:
Press this button to mute the output volume level.
4.Input Selector:
Use this button to switch between the
inputs.
5.Next & Previous Track:
Press either of these buttons
to go to the next or previous track on USB flash drive,SD
Card, iPod™(Classic and Nano) or bluetooth signals. In
tuner mode, press either of these buttons and hold for several
seconds to scan stations from the current frequency to the
highest or lowest frequency. The scan will not pause until the
unit finds a strong enough frequency. To save a specific
frequency (station), go to the station and then press the
“RPT/RDM” button on the face of unit or the “RPT” key on
the remote control and then using the number keys enter a
number for the saved station.The number entered should be between1 and 30. After entering the numbers,
press the “RPT/RDM” button or “RPT” key again to save. And the unit will exit the scan and play the station
stored.
6.Fast Forward & Rewind:
Press either of these buttons to fast forward of rewind. The unit will
continue to fast forward or rewind until the button is pressed again. This function will only works for
the USB flash drive,SD Card or iPod™(Classic and Nano) signals. In FM mode, press fast forward to
increase the frequency by 0.1MHz and press fast rewind to decrease the frequency by 0.1MHz. In AM
mode,press fast forward to increase the frequency by 10KHz and press fast rewind to decrease the
frequency by 10KHz.
7.Treble Control:
Press either of these buttons to increase or decrease the treble effects on the main
output.
8.Master Volume Control:
Use these buttons to adjust the master volume output.
9.Enter Button:
Press this button to confirm the track number or station number you entered using
the numbers key to quickly go to that track on the USB flash drive,SD Card or iPod™(Classic and
Nano) signals.
1
3
4
5
8
7
9
10
12
14
13
15
16
17
21
18
22
19
20
23
11
6
2
