B. DIALING, USING A MEMORY NUM BER
1. Lift the handset to obtain a dial tone.
2. To dial out the stored number 123 - 4567 which 1s tn
memory location number 1, press MEMORY button and
then the
OJ
button.
3. The number will be automatically dialed out.
4. Any of the nine memory locations can be dialed out by
first pushing the memory button MEMORY and then any
one of the 9 numeric buttons corresponding to the stored
number you wish to dial.
C. CHANGING A NUMBER IN MEMORY
Follow the same procedure for storing a number into memory.
The original number will be automatically erased.
D. ACCESS TO MCI, SPRINT OR OTHER LONG
DISTANCE SERVICES
These systems may be accessed by either pulse or tone dialing
systems to the local phone number, but your identification
code (I D) and the long distance number called must be in tone
dialing.
For example, If the local access number is 123 -4567 and
your local phone system will only respond to pulse dialing
- set the tone/pulse switch to pulse position and dial out
123-4567.
When you get the tone which requests your I. D., set the tone/
pulse switch to tone, enter your I. D. and long distance number
to complete the call. This is necessary because computers used
by these companies only "UN DERSTAND" tone.
6
TI�201-06.jpg Scanned by Frank Harrell, (Cowboy Frank) Castle Rock, Colorado Oct 18, 2012 12:53:32
