background image

69

8 Support

DMS3-CTC-25-154 v1.0

8.4 Reset to factory defaults

Resetting your TG389ac

If at some point you can no longer connect to the TG389ac or you want to make a fresh install, it may be useful to perform a 
reset to factory defaults.

Methods

You can choose between:

Resetting the TG389ac via the web interface

Reset the TG389ac via the Reset button

Resetting the TG389ac via the web interface

Proceed as follows:

1

Browse to the 

TG389ac web interface

.

For more information, see 

“4.1.1 Accessing the TG389ac web interface from your local network” on page 33

.

2

Click 

Gateway

. The 

Gateway

 page appears.

3

Click 

Reset

.

4

The TG389ac restores the factory default configuration and restarts.

Reset the TG389ac via the Reset button

Proceed as follows:

1

Make sure the TG389ac is turned on.

2

Push the 

Reset

 button for at least 7 seconds and then release it.

3

The TG389ac restarts.

A reset to factory default settings deletes all configuration changes you made. Therefore, after the reset a 
reconfiguration of your TG389ac will be needed.

Also your wireless clients will have to be re-associated, as described in 

“3 Wireless networking” on page 22

.

Your system administrator may have disabled the physical reset button of the TG389ac. In this case, a hardware reset 
to defaults is not possible.

Reset

Summary of Contents for MediaAccess TG389ac











































































Reviews: