72
6 SHARING YOUR USB PRINTER
DMS-CTC-20111123-0002 v1.0
6.3.1 How to install a printer on Windows 7/Vista
Requirements
Your computer must be connected to the MediaAccess Gateway. For more information, see
“2.3 Connecting Your Network
Devices to the MediaAccess Gateway” on page 20
.
Your printer has not yet been installed on your computer
In this case, proceed as follows:
1
On the Windows
Start
menu, click
Devices and Printers
.
2
On the bar on the top, click
Add a printer
.
3
The
Add Printer Wizard
appears. Select
Add a local printer
.
4
Select
Create a new port
and select
Standard TCP/IP Port
from the drop-down list. Click
Next
.
5
The
Type Hostname or IP address
page appears. Complete the following fields:
Hostname or IP address
: enter
192.168.1.253
.
Port Name
: enter a name for your port (for example, Technicolor Printer Port).
Click
Next
.
6
The wizard now attempts to automatically detect the printer. This will take a one or two minutes.
7
The wizard prompts you that additional information is needed. Select
Custom
and click
Settings
.
8
The
Configure Standard TCP/IP Port Monitor
appears.
Configure the following settings:
Under
Protocol
, select
LPR
.
Under
LPR Settings:
1
Type the name that you have configured in the MediaAccess Gateway in the
Queue Name
box (for the typical
configuration in
Configuring The Printer Sharing Service on Your MediaAccess Gateway
the name is
myprinter
).
2
Select
LPR Byte Counting Enabled
.
Click
OK
to confirm these port settings and click
Next
to continue in the
Add Printer
wizard.
9
The
Install the printer driver
window appears.
Select the manufacturar of your printer from the
Manufacturar
list and then select the printer model from the
Printers
list and click
Next
.
10
The
Type a printer name
window appears.
In the
Printer name
box type the name that you want to give to this printer and click
Next
.
(Optionally) When asked if printer sharing via your computer should be enabled, select
Do not share this printer
and
click
Next
to confirm.
11
Select
Print a test page
to print a test page with the newly installed printer or
Finish
to close the
Add Printer Wizard
.
Your printer has already been installed on your computer
In this case you only need to create the necessary printer ports. Proceed as follows:
1
On the Windows
Start
menu, click
Devices and Printers
.
2
Right-click the printer to be shared, click
Printer Properties
and go to the
Ports
tab.
Summary of Contents for TG650S
