12
Network settings
You can stream music from an iOS device
(iPhone/iPad/iPod), an Android™ device or a PC
(Mac/Windows) to this unit by using the AirPlay or DLNA
feature. (
>
13, 15)
To use these features, this unit must join the same network
as the AirPlay compatible device or the DLNA compatible
device.
Normally, just connecting a LAN cable will complete the
setup.
A
: LAN cable (not supplied)
1
Disconnect the AC power supply cord.
2
Connect this unit to a broadband router, etc.
using a LAN cable.
3
Connect the AC power supply cord to this
unit, and raise the power switch lever to the
[
Í
/I] position. (
>
10)
You can change this unit’s name on the network (Friendly
Name), and use specific IP address, subnet mask, default
gateway, primary DNS, etc.
≥
Do not play back music while changing these settings.
1
Press [NWP].
2
Press [HOME].
3
Press [
3
,
4
] repeatedly to select “SETUP” and then
press [OK].
4
Press [
3
,
4
] repeatedly to select “Network” and then
press [OK].
5
Select and input the details.
6
Press [OK] to apply the settings.
7
Press [RETURN] repeatedly to exit the settings.
8
Press [NWP
Í
] to turn the unit to standby mode.
≥
Wait until “Please Wait” disappears.
9
Perform “Wired LAN connection”. (
>
left)
≥
Use category 7 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥
Inserting any cable other than a LAN cable in the LAN port can
damage the unit.
≥
If you try to change the network settings immediately after turning
on this unit, it may take some time until the network setup screen
is displayed.
Wired LAN connection
Broadband router, etc.
This unit
(rear)
PC, etc.
To make network-related
settings
ST-C700-SQT0495_PP_mst.book 12 ページ ２０１５年１月７日 水曜日 午前１０時３６分
Summary of Contents for ST-C700
