background image

30

About Bluetooth

®

Frequency band used

This system uses the 2.4 GHz frequency band.

Certification of this device

This system conforms to frequency restrictions and has 
received certification based on frequency laws. Thus, a 
wireless permit is not necessary.

The actions below are punishable by law in some 
countries:

– Taking apart or modifying the system.
– Removing specification indications.

Restrictions of use

Wireless transmission and/or usage with all Bluetooth

®

 

equipped devices is not guaranteed.

All devices must conform to standards set by Bluetooth 
SIG, Inc.

Depending on the specifications and settings of a device, it 
can fail to connect or some operations can be different.

This system supports Bluetooth

®

 security features. But 

depending on the operating environment and/or settings, 
this security is possibly not sufficient. Transmit data 
wirelessly to this system with caution.

This system cannot transmit data to a Bluetooth

®

 device.

Range of use

Use this device at a maximum range of 10 m (33 ft). The 
range can decrease depending on the environment, 
obstacles or interference.

Interference from other devices

This system may not function properly and troubles such as 
noise and sound jumps may arise due to radio wave 
interference if this system is located too close to other 
Bluetooth

®

 devices or the devices that use the 2.4 GHz band.

This system may not function properly if radio waves from 
a nearby broadcasting station, etc. is too strong.

Intended usage

This system is for normal, general use only.

Do not use this system near an equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc).

Panasonic bears no responsibility for data and/or 
information that is compromised during a wireless 
transmission.

“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an 
electronic accessory has been designed to connect specifically to iPod, 
iPhone, or iPad, respectively, and has been certified by the developer to 
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance 

with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone, or iPad may 
affect wireless performance.
AirPlay, iPad, iPhone, iPod, iPod nano, and iPod touch are trademarks of 
Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.

Mac and OS X are trademarks of Apple Inc., registered in the U.S. and 
other countries.

Android is a trademark of Google Inc.

aptX

®

 software is copyright CSR plc or its group companies. All rights 

reserved.
The aptX

®

 mark and the aptX logo are trademarks of CSR plc or one of its 

group companies and may be registered in one or more jurisdictions.

The Bluetooth

®

 word mark and logos are registered trademarks owned by 

the Bluetooth SIG, Inc. and any use of such marks by Panasonic 

Corporation is under license.

Other trademarks and trade names are those of their respective owners.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service 
marks, or certification marks of the Digital Living Network Alliance.

“Direct Stream Digital”, DSD and their logos are trademarks of Sony 
Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and 
Thomson.

Windows and Windows Vista are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other 
countries.

Windows Media and the Windows logo are trademarks or registered 
trademarks of Microsoft Corporation in the United States and/or other 
countries.
This product is protected by certain intellectual property rights of Microsoft 
Corporation and third parties. Use or distribution of such technology outside 
of this product is prohibited without a license from Microsoft or an 
authorized Microsoft subsidiary and third parties.

FLAC Decoder
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

– Redistributions of source code must retain the above copyright notice, 

this list of conditions and the following disclaimer.

– Redistributions in binary form must reproduce the above copyright 

notice, this list of conditions and the following disclaimer in the 
documentation and/or other materials provided with the distribution.

– Neither the name of the Xiph.org Foundation nor the names of its 

contributors may be used to endorse or promote products derived from 
this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ST-C700-SQT0495_PP_mst.book  30 ページ  2015年1月7日 水曜日 午前10時36分

Summary of Contents for ST-C700





































Reviews: