12
Connect only after all other connections are completed.
∫
To disconnect the AC mains lead from this unit
Pull out the AC mains lead while pressing the top and bottom sides of the connector.
≥
Although the AC power switch is in the [
] position, the unit is not completely disconnected from the mains. Remove the plug from the
main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed.
NORSK
≥
Selv om hovedbryteren er i stilling [
], er ikke enheten koblet fra strømnettet. Koble kontakten fra strømuttaket hvis du ikke skal bruke
enheten på en stund. Plasser enheten slik at det er lett å dra ut kontakten.
If the SE-R1 is connected to this unit via the system control function, you can operate using the remote control of this unit.
Press and hold [LAPC] until the
LAPC indicator on the SE-R1
starts to blink.
≥
The SE-R1 will start measuring the characteristics of the amplifier if it is connected to the speakers.
≥
For information on the operations of the SE-R1, please also refer to its operating instructions.
AC mains lead connection
TENTATIVE
AC mains lead
(supplied)
To a household mains socket
This unit
(rear)
DO
DO NOT
Measuring the characteristics of the amplifier and correcting its
output
(12)
SU-R1-SQT0463_EBEG_mst.book 12 ページ ２０１４年１２月３日 水曜日 午前８時５７分
