background image

Your audio system is compatible with iPod models from
fourth generation onwards.
The iPod connects to the Docking Bay, located under the
top cover panel of your system. Lift the cover panel
where it is marked 'Open' when you want to dock your
iPod.
Before docking your iPod you must first select the correct
adaptor, then fit it into the iPod docking bay. There are 5
adaptors supplied, each has an adaptor number printed
on the side.

Refer to the table of compatible iPod models in the next
column and the correct adaptors to match them. Once
you have located the correct adaptor for your iPod, press
it gently into the iPod bay before attempting to connect
your iPod.
CAUTION: If you connect an iPod without fitting the
correct adaptor, you may damage the iPod and your
Music System.

NOTE: For newer iPod models that are not in the list such
as Nano and Video, use the adaptor that was supplied
with your iPod.

If you have docked a Video iPod, the video output is
available from the Video Out jack on the back panel of
your system. Connect a suitable single video phono
cable from this jack to a suitable composite video (CVBS)
input of yourTV/monitor to watch the video.

If you own an early model iPod that doesn't have a
docking connector or a different brand of MP3 player,
you can still connect the sound output to your system via
the AUX jack on the back panel.

Using a 3.5mm stereo plug to twin phono cable
(not supplied), connect one end of the cable to the
headphone jack of the iPod or MP3 player, and the
other end to the AUX jacks on the back panel.

To listen to your iPod, follow the instructions on
page 14 for playing equipment connected to the
AUX input.

NOTE:-The volume control of the iPod must be turned up
when playing through the AUX input.
NOTE:- An iPod without docking connector cannot be
controlled from the function keys of your system.

FINDINGTHE CORRECT iPod ADAPTOR

LIST OF COMPATIBLE iPod MODELS
iPod mini (4GB or 6GB)

iPod photo, with a colour display (30GB)

iPod photo, with a colour display (40GB or 60GB)

iPod, with a B&W display and clickwheel with
legends on wheel (20GB)

iPod, with a B&W display and clickwheel with
legends on wheel (40GB)

iPodVIDEO

CONNECTING AN iPod THAT DOESN'T HAVE A
DOCKING CONNECTOR

UseadaptorNo.3.

UseadaptorNo.6.

UseadaptorNo.7.

UseadaptorNo.4.

UseadaptorNo.5.

!

!

CONNECTING AN iPod

iPod COMPATIBILITY

11

Headphone

jack

AUX IN

TV

VIDEO

OUT

VIDEO

IN

Left

Right

Summary of Contents for MC-807





















Reviews: