PROGRAM PLAY
STOP
MEM/PROG
.
MEM/PROG
STOP
.
STOP
AUX
VOLUME
In CD stop mode, a maximum of 20 tracks can be
programmed to play in any desired order.
Load your disc as usual and wait for the disc to read.
Press the /
button to stop the disc.
Press the
button
Press the
or
buttons to select the first track
to be programmed
Now press the
button to confirm.
Repeat the last two steps to program further tracks
into the program.
When you have completed programming, press the
button to begin program play.
In CD stop mode: Press the /
button once
In CD play mode: Press the /
button twice.
During Program Play:
The AUX input may be used to connect a variety of other
sound sources to play through your system. These may
include -
-
iPod models without a docking connector
-
Other types of MP3 player
-
CD walkman players
-
Tape walkman players
-
Personal computers or laptops
You will need an interconnect cable (not supplied) with
dual stereo phono plugs to connect to your system and
connector(s) at the other end suitable for the personal
audio player/computer.
Connect the cable between the headphone or
LINE/AUX output of the personal audio player and
the AUX inputs on the back panel of your system.
With the cable connected, select the AUX input by
pressing the
button until 'Aux' is shown on the
display.
Set your personal audio player/computer to PLAY.
Set the listening volume to the level you want with
the
/
buttons.
NOTE: If there is no sound or the volume level is not loud
enough, you may need to increase the volume setting on
your personal audio player/computer.
$
$
$
$
$
$
$
$
The display will show "CD Program" and the number 1 will
flashnexttothe'Prog'legend.
The first track to play is now programmed, the display will
show"Prog2"andisreadyforthenextentry.
The display will show "CD Prog Play". Playback begins on
the first track you programmed and will end after the last
programmedtrackhasplayed.
Toerasetheprogram:
Changing source will also cancel Program play (and stop
thediscifitisplaying).
Youcansearchandskiptracks.
Youcanrepeatatrackorthecompleteprogramme.
$
$
$
$
$
CD PROGRAM PLAY
14
Program
position
Track
number
AUX INPUT
