Technika 22-910, Operating Instructions Manual

English

   - 9 -

HDMI

 1

DM

HI

 2

SPDIF

Coax.OUT

Scart

 Cable

(not

supplied)

External device

Note

• 

: These three methods of connection perform the 

same function but in different levels of quality. It is not 
necessary to connect by all three methods.

Remote Control Handset

Inserting Batteries

Remove the battery cover located on the back of 

• 

the handset by gently pulling backwards from the 
indicated part.
Insert two 

• 

AAA/R3

 or equivalent type batteries 

inside.  Observe the correct polarity (+/-) when 
inserting batteries and replace the battery cover.

Connecting to a DVD Player via 
HDMI

Please refer to your DVD player’s instruction book 
for additional information. Power off both the TV and 
the device before making any connections.
Note

: Not all cables shown in the illustration are 

supplied.

If your DVD player has an 

• 

HDMI

 socket, you can 

connect via 

HDMI 

for better video and audio quality.

HDMI

 1

DM

HI

 2

SPDIF

Coax.OUT

External device

(not

supplied)

HDMI Cable

When you connect to DVD player as illustrated above, 

• 

switch to the connected 

HDMI 

source. See, 

Input 

Selection

 section for more information on changing 

sources.

Connecting to a DVD Player via 
Component Sockets (YPbPr) or 
Scart Cable

Some DVD players are connected through 

• 

COMPONENT SOCKETS (YPbPr). YPbPr can be 
used only when you connect a device that has a 
YPbPr output through the PC input with YPbPr to 
PC cable (YPbPr cable is not supplied).
When the connection is made, switch to YPbPr 

• 

source. See, “Input selection” section.
To enable audio connection, use the 

• 

VGA/

Component Audio cable

. First, plug single jack 

of the cable to the TV. Afterwards, insert your DVD 
player’s audio cable’s connectors into the plural part 
of the 

VGA/Component audio connection cable 

(

see illustration below

). Colours of the connected 

jacks should match ( RED & WHITE). 

AV Connection

Cable (supplied)

Audio  Cable

(not supplied)

To  DVD  Player's
Audio  Outputs.

SIDE

 AV

When the connection is made, switch to 

• 

YPbPr

 source. 

See, 

Input selection

 section.

You may also connect through the 

• 

SCART

 input. 

MB60_[GB]_1825UK_IDTV_woypbpr_NICKEL16_22910W_10072257_50184992.indd   9

MB60_[GB]_1825UK_IDTV_woypbpr_NICKEL16_22910W_10072257_50184992.indd   9

14.03.2011   09:42:03

14.03.2011   09:42:03