Technika 22-910, Operating Instructions Manual

English

   - 13 -

can select Digital Aerial, Analogue or Digital Aerial-
Analogue tuning using 

“ ”/“ ”

 and 

OK 

buttons.

Automatic Channel Scan (Retune) Menu 
Operation

Digital: 

Searches and stores aerial DVB stations.

Analogue:

 Searches and stores analogue stations.

Full: 

Searches and stores both analogue and aerial 

DVB stations.

Whenever you select an automatic search type and 

• 

press 

OK 

button, a con

fi

 rmation screen will appear 

on the screen. To start installation process, select 

Yes

, to cancel select 

No 

by using .“ ” or “ ” and 

OK

 button. 

After auto channel scan type is set and selected 

• 

and con

fi

 rmed, installation process will start and 

progress bar will move along. Press

 “M”

 button to 

cancel process. In such a case, located channels 
are not stored.

Manual Tuning 

HINT:

 This feature can be used for direct broadcast 

entry.

Select 

• 

Manual Channel Scan

 from the Installation 

menu by using “ ”/“ ” and 

OK

 buttons. Manual 

Scan options screen will be displayed. 
Select the desired 

• 

Search Type

 using “ ” or “

” button. Manual search options will change 

accordingly. Use “ ”/“ ” button to highlight an item 
and then press “ ” or “ ” button to set an option. 
You can press 

“M”

 button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex 
or frequency are entered manually and only that 
multiplex or frequency are searched for the channels. 
After selecting search type as 

Digital

, you can enter 

the multiplex or frequency number using the numeric 
buttons and press 

OK

 button to search.

Analogue Manual Search

After selecting search type as analogue, you can use 
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option. 
Enter the channel number or frequency using the 
numeric buttons. You can then press 

OK

 button 

to search. When the channel is located, any new 
channels that are not on the list will be stored.

Analogue Fine Tune

Select 

• 

Analogue Fine Tune

 from the Installation 

menu by using “ ” or “ ” and 

OK

 buttons. Analogue 

fi

 ne tune screen will be displayed. Analogue Fine 

Tune feature will not be available if there are no 
analogue channels, digital channels and external 
sources stored. 
Press 

• 

OK

 button to proceed. Use “ ” or “ ” button 

to set Fine Tune. When 

fi

 nished, press 

OK

 button 

again.

Clear Service List (*)

(*) This setting is visible only when the Country option 
is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “ ” or 
“ ” button to select Clear Service List and then press 
OK. The following OSD message will be displayed 
on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ” 
button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List. 
You can edit this channel list, set favourites or set 
active stations to be listed by using the Channel List 
options.

Press 

• 

“M”

 button to view main menu. Select 

Channel List item by using “ ” or “ ” button. Press 

OK

 to view menu contents.

MB60_[GB]_1825UK_IDTV_woypbpr_NICKEL16_22910W_10072257_50184992.indd   13

MB60_[GB]_1825UK_IDTV_woypbpr_NICKEL16_22910W_10072257_50184992.indd   13

14.03.2011   09:42:05

14.03.2011   09:42:05