Technika 32-2010, Operating Instructions Manual

English   

- 12 -

Digital Teletext (** for UK only)

• Press the “

” button.

• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons 

and 

OK

 button.

The operation method may differ depending on the 

contents of the digital teletext.
Follow  the  instructions  displayed  on  digital  teletext 

screen.

• When Press “

SELECT

” button or similar message 

appears on the screen, press the OK button.

• When the “

” button is pressed, the TV returns to 

television broadcasting.

•  With  digital  terrestrial  broadcasting  (DVB-T),  in 

addition to digital teletext broadcasting together with 

the normal broadcasting, there are also channels 

with just digital teletext broadcasting.

• The  aspect  ratio  (picture  shape)  when  watching 

a channel with just digital teletext broadcasting is 

the same as the aspect ratio of the picture viewed 

previously.

• When you press the “

” button again, the digital 

teletext screen will be displayed.

Analogue Teletext

Use  of  teletext  and  its  functions  are  identical  to 

the  analogue  text  system.  Please  do  refer  to  the 

“

TELETEXT

” explanations.

Widescreen

Depending  on  the  type  of  the  broadcast  being 

transmitted, programmes can be viewed in a number 

of formats. Press the “

” button repeatedly to 

change screen format.
When Auto is selected, the format being displayed is 

determined by the picture being broadcasted.

PLEASE  NOTE

:  Menu  size  changes  depending  on  the 

chosen image size.

Notice !

AC3  audio  type  is  not  supported.  In  this  case, Tv 

sound will be muted. If the broadcast includes AC3 

stream,  the  following  warning  message  will  be 

displayed on the screen: 

If there is no audio available, the following warning 

message will be displayed on the screen:.

IDTV Menu System

Press the “

M

” button. Main menu will be displayed.

Channel List

Using the “ ” or “ ” button on the remote control, make 

sure that the first item, Channel List, is highlighted and 

press the “

OK

” button to display the Channel List.

Navigating the Entire Channel List

Press “ ” or “ ” button for selecting the previous or next 

channel. You can press “

RED”

 or “

GREEN

” button to 

move page up or page down.

To watch a specific channel, highlight it using  “

” 

or “ ” button and then press “

OK

” button, while the 

“Select” item on Channel List menu is highlighted 

by using “ ” or “ ” button.
Then the name and number of the selected channel will 

be displayed in the top-left and top-right of the channel 

display at the top-right of the screen, respectively.

Moving the channels in the channel list

• Press “

” or “ ” buttons to select the channel that 

will be moved.

• Press “

” or “ ” buttons to select the “

Move

” item on 

Channel List menu.

Following  OSD  will  be  displayed  next  to  “

OK

”  item 

to indicate that enter a number by using the numeric 

buttons  on  the  remote  control  and  press  “

OK

”    to 

confirm.