Technika 32-2010 Operating Instructions Manual Download

Page: 8 / 31

English

- 7 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the

channels that you subscribe to. For more information, see “Conditional

Access” section.

Component Video Inputs (YPbPr)

are used for connecting component

video.You can connect the component video and audio sockets with a device

that has component output. Connect the component video cables between

the

COMPONENT VIDEO INPUTS

on on the TV and the component video

outputs of your device. While connecting, be sure that the letters on your TV,

“

”, “

” correspond with your device’s connectors.

IMPORTANT:Please do not connect a device to PC socket while using

YPbPr input.

Video Input is used for connecting video signals of external devices.Connect

the video cable between the VIDEO IN socket on the TV and the VIDEO

OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable

PC/YPbPr

sound connection in such a case, use an

appropriate audio cable between the connected device’s audio outputs and

the TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable you should also connect

your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system. Connect to the

HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT

: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

SPDIF

SCART

VGA

Coax.OUT

I 2

I 1

Summary of Contents for 32-2010
































Search results

Summary of Contents for 32-2010

Reviews:

Related manuals for 32-2010

Brands by name

Popular brands

Technika 32-2010, Operating Instructions Manual

Search results

Summary of Contents for 32-2010

Reviews:

Related manuals for 32-2010

Brands by name

Popular brands