English
- 23 -
button. Follow the on-screen dialogues to proceed and
enter the required values respectively.
If the Ethernet cable is not connected, depending on
the current connection status,
Configure Ethernet
Connection
or
Configure Network
option will be
available instead of
Ethernet Configuration
option.
2
3
1
1.
Broadband ISP connection
2.
LAN (Ethernet) cable
3.
LAN input on the rear side of the TV
You might be able to connect your TV to a network
wall socket depending on your network’s configuration.
In that case, you can connect your TV directly to the
network using an Ethernet cable.
1
2
1.
Network wall socket
2.
LAN input on the rear side of the TV
Wireless Connection
A wireless LAN modem/router is required to connect
the TV to the Internet via wireless LAN.
Highlight
Wi-Fi
option in the
Network
menu and press
Select
to enable wireless connection. Then disconnect
the Ethernet cable, if connected priorly. Some of the
available networks will be listed. Highlight
See All
Networks
and press
Select
to see the complete list.
If you prefer to connect your TV to your network via
WLAN you have 3 ways to do this.
•
Highlight one of the listed available wireless networks
and press
Select
. Then enter the password if the
network is password protected.
•
Use the WPS button on your router. Highlight
Join
Network Using WPS (Button)
option and press
Select
. Press the WPS button on your router. Your
TV will connect to your router, without the use of a
password.
Note:
During the initial setup process
Connect using
WPS Push Button
option will be available instead of
Join
Network Using WPS (Button)
option.
•
Enter WPS PIN on your router. Highlight
Join
Network Using WPS (PIN)
option and press
Select
.
A code will be created and displayed on the screen.
Enter this code on your router. Your TV will connect
to your router, without the use of a password.
Note:
During the initial setup process
Connect using WPS
PIN
option will be available instead of
Join Network Using
WPS (PIN)
option.
1
1.
Broadband ISP connection
A network with hidden SSID can not be detected by
other devices. If you want to connect to a network
with hidden SSID, highlight the
Join Other Network
option under the
Network
menu and press
Select
.
Add the network by entering its name, security type
and password manually. If you want to configure
additional settings of the network manually, highlight
Advanced
when prompted and press
Select
. Follow
the on-screen instructions to proceed and enter the
required values respectively.
If you want to save the wireless network passwords
to Amazon you can use the
Save Wi-Fi Passwords
to Amazon
option. To delete saved passwords turn
this option off.
A Wireless-N router (IEEE 802.11a/b/g/n/ac) with 2.4
and 5 GHz bands is designed to increase bandwidth.
These are optimized for smoother and faster HD video
streaming, file transfers and wireless gaming.
Use a LAN connection for quicker data transfer
between other devices like computers.
The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic
and the products that you use. The transmission may
