Technika LCD19-915, Operating Instructions Manual

English   

- 12 -

 After Automatic Search is completed, the following 
message asking for analogue channel search appears 
on the screen:  

 To search for analogue channels, select “Yes”.  TV 
switches to the analogue TV mode. The menu is 
displayed to search for analogue channels.   
 Select your Country, Language and Text language 
by using “ ” or “ ” and “ ” or “ ” buttons. Press 

OK

 or 

RED

 button to continue. To cancel, press the 

BLUE

 button.

For more information on this process, see “Install Menu” 
section. 

Note

 : For proper functioning of digital teletext in DTV mode, you 

should set country as UK in analogue AUTO PROGRAMME (for 
UK broadcasts only).
Do not turn off the TV while initializing 

fi

 rst time installation. 

 General Operation

Press the “

SOURCE

” button on the remote control 

and select DTV/USB to switch the TV set to digital 
terrestrial television broadcasting.    

 Information Banner 

 • Whenever you change channel, using the 

P- / P+

button or the numeric buttons, the TV displays the 
broadcast picture along with an information banner 
at the bottom of the screen (available only in DTV 
mode). This will remain on the screen for a few 
seconds.  

 • The information banner can also be displayed at 

any time while watching TV by pressing the “

INFO

” 

button on the remote control: 

     If the selected channel is locked, you must enter the 
correct four numeric code to view the channel. “Enter 
PIN” will be displayed on the screen in such a case: 

 Timeshifting 

IMPORTANT

: 

To record a programme, you should first 

connect a USB disk to your TV

 while the TV is switched off

. 

You should then switch on the TV to enable recording feature. 
Otherwise, recording feature will not be available.

• Press    (

PAUSE

) button while watching a broadcast 

for switching to timeshifting mode. 

• In timeshifting mode, the programme is paused and 

simultaneously recorded to the connected USB disk 
(*). Press “ ” (

PLAY

) button again to watch the 

paused programme from the stopped moment. 

• This playback is performed in 

x1

 playback speed. 

You will see the timeshift gap between the real and 
the timeshifted programme in the info bar. 

• Use 

 (

PREVIOUS/NEXT

) buttons to move 

forward or backward on timeshift playback. When 
the timeshift is reached, timeshifting mode will be 
quitted and you will switch back to watching normal 
broadcast.

• Press   (

STOP

) button to quit timeshifting mode. 

(*) Similtaneous timeshifting recording’s duration depends 
on your connected USB disk’s 

fi

 le size and de

fi

 ned  Max. 

Timeshift in the Recordings Con

fi

 guration menu. See the 

section, “Recordings” for more information on setting Max. 
Timeshift.
Note: Switching to a different broadcast or source; and viewing 
main menu are not available during the timeshifting.

Instant Recording

IMPORTANT

: 

To record a programme, you should first 

connect a USB disk to your TV

 while the TV is switched off

. 

You should then switch on the TV to enable recording feature. 
Otherwise, recording feature will not be available.

• Press 

 (

RECORD

) button to start recording an 

event instantly while watching a programme. The 
following OSD appears on the screen:

• Record OSD will then be displayed for a short time 

and the current event will be recorded.

• You can press 

 (

RECORD

) button on the remote 

control again to record the next event on the EPG. In 
this case, OSD will display the programmed events 
for recording.

MB45_[GB]_1900UK_PVR_IDTV_NICKEL9_19882W_10066963_50161761.indd   12

29.01.2010   14:24:41