Technika LCD22-921, Operating Instructions Manual

English   

- 17 -

• Some CAMs may require the following set up. 

Please set the CAM by entering the Digital TV 
menu,  Conditional Access then pressing the OK 
button. (CAM set up menu is not displayed when it 
is not required.)

• To see the viewing contract information: enter 

Digital TV; press the “ 

MENU 

” button, then highlight 

Conditional Access and press the  

OK 

 button.

• When no module is inserted, “No Conditional 

Access  module detected” message appears on 
the screen.

• Refer to the module instruction manual for details 

of the settings. 

NOTE: Insert or remove the CI module only when the 
TV  is switched off or in standby mode.

 TV Setup 

 You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from 
the main menu. Press the  

“MENU”

  button to display 

the main menu and use “ ” or “ ” button to highlight 
“TV Setup”, press the  

OK

  button to display TV Setup 

menu screen. 

 You can 

fi

 nd detailed information for all menu items 

in “Analogue TV Menu System” section. 

 Setup 

 The adjustments in this menu are given as the 
following: 

 Con

fi

 guration 

 You can con

fi

 gure the settings of your TV. Select 

Con

fi

 guration from Setup menu and press  

OK

  to 

view this menu. Press the  

EXIT

  button on the remote 

control to exit. 

 AC3 Audio (* for EU countries only) 

 In the Con

fi

 guration Menu, highlight the AC3 Audio 

item by pressing  “ ” or “ ” buttons. Use the  “ ” or 
“ ” buttons to set the AC3 Audio as On or Off.
If the channel that you are watching supports AC3 
Audio, turn this setting on. 

 Hard of Hearing (* for EU countries only) 

 Use  “ ” or “ ” button to select Hard of Hearing and 
then press  “ ” or “ ” button to set this setting  as 
On or Off.
If the broadcaster enables any special signal 
concerning the audio, you can set this setting as On 
to receive such signals. 

 Favourite Mode 

 Use this function to enable or disable favourite 
mode. Press “ ” / “ ” button to set this function as 
on or off. 

 Channel List 

 Use “ ” or “ ” buttons to go to Channel List option. 
Use “ ” or “ ”  buttons to toggle Channel List Mode. 
If you select “TV Only”, with the “ ” or “ ”  buttons, 
you navigate through only TV channels. If you select 
“Radio Only”, with the “ ” or “ ”  buttons, you navigate 
through only radio channels.  If you select “Text Only”, 
with the “ ” or “ ”  buttons, you navigate through only 
text channels.  

Active Antenna

Use “ ” or “ ” buttons to highlight Active Antenna 
option.
When antenna power option is set as On by pressing 
“ ” or “ ” button, +5V will be transmitted to the 
antenna output.
This feature enables the use of active antenna.

Note:

 Antenna power should be “Off” when standard 

antenna is used instead of the active antenna.

Scan Encrypted (**)

(**) for UK broadcasts only.

Scan Encrypted Channel feature will always be ON 
after performing 

fi

rst time installation. When this 

setting is on, search process will locate the encrypted 
channels as well. If it is set as OFF manually, encrypted 

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd   17

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd   17

02.11.2009   15:00:11

02.11.2009   15:00:11