Technika LCD22-921, Operating Instructions Manual

English   

- 18 -

channels will not be located while in automatic search 
or manual search.
Use “ ” or “ ” button to select Scan Encrypted and 
then press “ ” or “ ” button to set this setting as 
On or Off.

 Receiver Upgrade 
 Over Air Download (OAD) 

 To ensure that your TV always has the most update 
information, use this setting. Please ensure that the TV 
is set to standby mode. The  TV automatically powers 
up at 3.00 A.M. each day and searches for any new 
information which may be broadcast and will download 
this to your receiver automatically. This operation will 
normally take approximately 30 minutes. If you have 
an important recording to be carried out at 3.00 A.M. 
and you do not want to interrupt it, disable auto OAD 
search by performing the following:  

 • Press  

“MENU”

  button and using the “ ” or “ ” 

buttons to choose Setup and press the  

OK 

 button.

• Highlight Con

fi

 guration menu with “ ” or “ ” keys 

and press  

OK

 .

• Use “ ” or “ ” buttons to choose “RECEIVER 

UPGRADE” and press  

OK

  button. 

 • Using the“ ” or “ ” button change “Automatic 

scanning” from Enabled to Disabled.

• Highlight “Scan for upgrade” menu with “ ” or “ ” 

keys and pres OK to commence upgrade.

• After the search progress is completed, the message 

“ Completed searching for upgrade. No new software 
was found” appears on the screen if no new software 
is found.

• Do not forget to re enable the automatic OAD 

function after you have made your recording by 
repeating the above instructions but this time 
selecting ENABLE. 

Note: Your TV may start in First Time Installation mode 
after OAD update.

 Parental Control 

 Use “ ” or “ ” buttons to go to Parental Lock option. 
Press OK button to enter the menu. A dialog box 
asking for the lock key will be displayed. The key is set 

to “0000” initially. Enter PIN. If it is incorrect, “Wrong 
Pin” OSD will be displayed. If it is correct, the Parental 
Control menu will be displayed: 

 Maturity Lock  (*)

 (*) If you set Country option as UK in the 

fi

 rst  time 

installation, Maturity Lock option will not be visible. 
This setting is available only for EU countries.

When set, this option gets the maturity information 
from the broadcast and if this maturity level is disabled, 
does not show video-audio. 

 Menu Lock 

 In menu lock you can set locking for all menus, or the 
Installation Menu to restrict access to these menus. 
If the menu lock is disabled, there will be free access 
to the menu system. Use  “ ” or “ ” buttons to go to 
Menu Lock option. Use  “ ” or “ ” buttons to choose 
Menu Lock Mode. 
  

DISABLED

  : All menus are unlocked. 

ALL MENUS

  : All  Menus are  accessible only with 

the correct lock key. So the user cannot add, delete, 
rename, channels, cannot set timers. 
 

INSTALLATION MENU

 : Installation menu is locked.

So the user can’t add channels. Changes will be 
updated after exiting ‘Con

fi

 guration Menu’.

 Set PIN 

Use “ ” or “ ” buttons to go to “Set PIN” option. Press 
 

OK

  to display the “Set PIN” window. Use numeric 

buttons to enter new pin number you will need to 
input your new pin a second time for veri

fi

 cation 

purposes. The factory default pin number is 0000, 
if you change the pin number make sure you write it 
down and keep it safe. 

 Time Settings

In the con

fi

guration menu, highlight the Time Settings 

item by pressing “ ” or “ ” buttons.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time Zone 
Setting and Time Zone will be available.
Use “ ” or “ ” buttons to highlight the Time Zone 
Setting. Time Zone Setting is set using “ ” or “
”buttons. It can be set to AUTO or MANUAL.

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd   18

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd   18

02.11.2009   15:00:12

02.11.2009   15:00:12