Technika LCd26-209X, Operating Instructions Manual

English   

- 13 -

• By pressing  “

OK

”  button, the highlighted channel is 

added to the Favourite List. 

• F icon indicates that a channel is added  to Favourite 

List.

  Removing a Channel from Favourite List

  • Highlight the channel that you want to remove from 

the favourite list and press OK button to remove.You 
can press “

OK

” button again to re-add a channel.

 • To activate Favourites, go to the Con

fi

 guration menu 

and select Favourite mode. Use “ ” / “ ” to set 
Favourite mode as on. To cancel Favourites, set 
Favourite Mode to Off.

  On Screen Help  

 For all menus, press the  

INFO

  button to display the 

help information about the menu functions. 

 Programme Guide 

 This section is same with the instructions given in 
the General Operations page. Please see Electronic 
Programme Guide (EPG) section in the General 
Operations part. 

 Timers 

 To display timers window, activate the item from the 
main menu. To add a timer, press the  

YELLOW

  button 

on the remote control. Then  “Add Timer” window 
appears. 
  

Channel

 : “ ” or “ ” keys will navigate the user 

through the TV or Radio list.
 

Date

 : Starting date is entered via the Left/Right or the 

numeric buttons.
 

Start

 : Starting time is entered via the Left/Right or 

the numeric buttons.
 

End

 : Ending time is entered via the Left/Right or the 

numeric buttons.
 

Change/Delete

 : permits or prohibits any modi

fi

 cations 

for other users.

Duration:

 Duration between Start and End time.

Repeat:

 You can set a timer to be repeated as Once, 

Daily or Weekly.
You can save the adjustments by pressing the 

GREEN

key or cancel the process by pressing the 

RED

 button. 

You can edit the list via 

GREEN

 key and delete with 

the 

RED

 button. 

 Conditional Access 

 • Press the  “ 

M 

”  button to display the main menu and 

use the “ ” or “ ” button to highlight the “Conditional 
Access” line and press the  “ 

OK

 ”  button: 

 Some Digital Terrestrial channels operate on a Pay 
Per View basis. These require a subscription and a 
hardware decoder.
Obtain the Conditional Access Module (CAM) and the 
viewing card by subscribing to a pay channel company, 
then insert those to the TV using the following procedure. 
 • Switch off the TV and unplug from the mains.
• The CAM should be correctly inserted, it is impossible 

to insert fully if reversed. The CAM or the TV terminal 
may be damaged if the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch on and then 

wait for few moments until the card is activated.

• Some CAMs may require the following set up. Please 

set the CAM by entering the IDTV menu, Conditional 
Access then pressing the “

OK

” button. (CAM set up 

menu is not displayed when it is not required.)

• To see the viewing contract information: enter IDTV; 

press the “ 

M 

” button, then highlight Conditional Access 

and press the  “ 

OK

 ”

 button.

• When no module is inserted, “No Conditional Access 

module detected” message appears on the screen.

• Refer to the module instruction manual for details of 

the settings. 

Note

: Insert or remove the CI module only when the TV  is 

switched off or in standby mode.

 TV Setup 

 You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from 
the main menu. Press the  

“M”

  button to display the 

main menu and use “ ” or “ ” button to highlight “TV 
Setup”, press the  “ 

OK

 ”  button to display TV Setup 

menu screen. 

 You can 

fi

 nd detailed information for all menu items in 

“Analogue TV Menu System” section. 

 Setup 

 The adjustments in this menu are given as the following: 

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd   13

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd   13

18.02.2010   15:44:30

18.02.2010   15:44:30