Technika LCD32-209V, Operating Instructions Manual

English   

- 8 -

    Power Connection

  IMPORTANT 

: The TV set is designed to operate on 

220-240V AC, 50 Hz. 

 • After unpacking, allow the TV set to reach the 

ambient room temperature before you connect the 
set to the mains. 

 • Plug the power cable to the mains socket outlet.   

   Connecting to a DVD Player 

 If you want to connect a DVD player to your LCD 
TV, you can use connectors of the TV set. DVD 
players may have different connectors. Please refer 
to your DVD player’s instruction book for additional 
information. Power off both the TV and the device 
before making any connections. 

 Note

: Cables shown in the illustration are not 

supplied. 

 • If your DVD player has an HDMI socket, you can 

connect via HDMI. When you connect to DVD player 
as illustrated below, switch to HDMI source. See, 
“Input Selection” section.

• Most DVD players are connected through 

COMPONENT SOCKETS. Use a component video 
cable to connect  video input. For enabling audio, 
use a component audio cable as illustrated below. 
When the connection is made, switch to YPbPr 
source. See, “Input selection” section.

• You may also connect through the 

SCART socket

. 

Use a SCART cable as shown below.

Note

 : These three methods of connection perform the 

same function but in different levels of quality. It is not 
necessary to connect by all three methods. 

HDMI

input

Scart  socket

Component 

video

inputs

Component 

audio

inputs

DVD  Player

  Using Side AV Connectors 

 You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied. 
  • For connecting a camcorder, connect to the S-VIDEO 

or VIDEO IN socket and the AUDIO SOCKETS. Do 
not connect the camcoder to S-VIDEO and VIDEO 
IN socket at the same time since it can cause noise 
in the picture. For selecting the related source, see 
the section “Input selection” in the following parts. 

• To listen the TV sound from headphones, connect 

to the HEADPHONE jack of theTV. 

Camcorder

Headphone

   Using Other Connectors

  You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied. 
 • To connect external speakers, use an audio cable. 

Do not reverse the AUDIO LEFT and AUDIO RIGHT 
jacks. Turn on the LCD TV and external speaker set 
after all connections are made. Refer to your speaker 
set’s manual for further queries.

• For connecting a to a device that has SPDIF support, 

use an appropriate SPDIF cable to enable sound 
connection.  

You should also set SPDIF Out option 

in the Sound menu as On.

External  Speakers

A  device  that 

supports 

SPDIF  signal.

MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd   8

MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd   8

16.08.2009   11:42:22

16.08.2009   11:42:22