Technika LCD46-920, Operating Instructions Manual

English   

- 20 -

Notes:
• System Language determines the on-screen menu 

language.

• Audio Language is used for selecting the soundtrack 

of a channels.

• Primary settings are the 

fi

rst priority when multiple 

choices are available on a broadcast. Secondary 
settings are the alternatives when the 

fi

rst options 

are not available.

 Installation 

 The Installation menu is mainly intended to help you 
for creating a Channel Table in the most ef

fi

 cient way. 

Select Installation from the Con

fi

 guration menu by 

pressing “ ” or “ ” buttons.   

 Automatic Channel Scan 

 Automatic channel scan is started by pressing 
OK button while Automatic channel scan item is 
highlighted. 
 The following message appears on the screen: 

 Highlight Yes or No by using “ ” or “ ” buttons and 
press  

OK

  button to con

fi

 rm.

If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a 
message asking whether to search for analogue 
channels appears on the screen: 

 Press the OK button to search for analogue channels. 
The following menu appears on the screen for 
analogue channel search: 

 Select your  

Country

 ,  

Language

  and  

Text language

by using “ ” or “ ”  and  “ ” or “ ” buttons. Press 
 

OK

  or  

RED

  button to continue. To cancel, press  

BLUE

button. The following menu will be displayed during 
the automatic tuning: 

 After APS is 

fi

 nalized, the programme table will appear 

on the screen. In the programme table you will see 
the programme numbers and names assigned to the 
programmes.
If you do not accept the locations and/or the 
programme names, you can change them via the 
program table. 

 Manual Channel Scan 

 In manual channel scan, the number of the multiplex is 
entered manually and only that multiplex is searched 
for the channels. For every valid channel number, 
signal level and signal quality are shown on the 
screen.
In both manual and auto search any existing channel 
in the database is not re-stored to avoid redundant 
duplicates of that channel. 

Clear Service List (*)

(*) This setting is visible only when the Country option 
is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “ ” or 
“ ” button to select Clear Service List and then press 
OK. The following OSD message will be displayed 
on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ” 
button and press OK to delete all of the channels.

[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd   20

[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd   20

16.10.2009   10:21:41

16.10.2009   10:21:41