PROGRAM PLAY
You can programme the player to play up to 64 tracks.
Example: Set up a program of 3 tracks:
!
!
!
!
!
!
!
!
!
!
Load a CD. Press STOP.
Press
The display shows
Press
to select a track, say
Press
Press
to select a track, say
Press
Select a track, say .
Press
to store the program.
Press PROG repeatedly.
At each stage you can edit the program or add extra tracks to the program.
TO PLAY THE PROGRAM: Press PLAY/PAUSE
Program play will
commence from track 8
ll
functions are fully operational.
If you press
and then
the CD will play as normal.
If you now press
the program will play.
Press
Press ESP to switch the ESP function
and
The player uses a memory buffer to prevent skipping
when the unit is subjected to shocks and vibration. This
function automatically turns on when play is started.
When ESP is operating, battery consumption is higher.
In normal use you may switch this function off to
conserve battery power.
When a CD has finished or after STOP is pressed, the CD will stop. After a short
time, if no further commands are received, the player will switch off.
HOLD disables all player controls except playback.. Use this function when
you are on the move to prevent accidental operation.
PROG.
SKIP/SEARCH
PROG.
SKIP/SEARCH
PROG.
6
PROG
MODE
STOP
PLAY/PAUSE,
STOP, PROG, PLAY/PAUSE
STOP
OFF
ON
P-0 1
8
3
To review the contents of a program:
In Program Play:
To cancel a program:
twice
In Program Play a
ELECTRONIC SHOCK PROTECTION
AUTOMATIC SHUT-OFF
HOLD
!
The display shows
The display shows
P-0 2
P-0 3
ESP
PGM
6
ESP
PGM
ESP
PGM
ESP
PGM
ESP
PGM
ESP
PGM
ESP
PGM
ESP
PGM
ESP
PGM
ESP
ESP ON
ESP OFF
HOLD
ON
OFF
EXTERNAL CONNECTIONS
You will need to purchase a cable with a Stereo 3.5 jack
plug to connect to the player and suitable connections to
match your audio equipment.
Connect the LINE OUT socket on the playe rwith a suitable
LINE INPUT connection on your audio equipment.
Suitable inputs are labelled
A Phono input designed to accept a phono cartridge from a
turntable is NOT acceptable.
Switch off and disconnect all units from the from the
mains before making connections!
CD, Line, Aux, Tape.
B: EARPHONE CONNECTION
Connect the supplied earphones to the Green PHONE socket.
wear the earphones while driving or cycling. It may
create a traffic hazard
Use extreme caution or discontinue use in potentially
hazardous situations, such as walking, jogging, etc
Note on listening with earphones
Listen at moderate volumes to avoid hearing damage.
Do not
!
!
!
!
If you use the full level of bast boost with the sound turned up
you may overload the player. If at any time you hear distortion
or the sound breaks up, turn the volume down
immediately.
Listening at high volumes can damage your hearing!!
3
A: LINE OUT CONNECTIONS
B
A
