background image

 

 

 

Before you use the steam oven for the first time, turn the appliance on at highest temperature. 
This will remove oils left on the appliance during manufacture. 

Do  not  leave  cooked  food  in  steam  oven  for  a  long  time  to  avoid  too  much  condensation 
generated on door.

When cooking is finished, please keep a distance from oven door as there will be a lot of hot 
steam.

After  cooking  we  recommend  that  you  should  clean  food  left  in  the  steam  oven  and 
condensation produced on the inner glass of the steam oven immediately. 

After cooking, extra water would be transferred back to the water tank. Please empty the water tank. 

Never use the steam oven as a room heater. 

In  order  to  ensure  the  food  is  delicious,  we  recommend  that you  pour  in  fresh  water  before 

cooking. 

  DO NOT use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass

since they can scratch the surface, which may result in shattering of the glass.

  An authorised person must be contracted to replace the temperature probe if it is damaged.

        The probe is part of the thermostat. Only use the temperature sensing probe recommended 

        for this oven.

  Once installed do not allow the supply cord to touch hot parts of the oven or come into

    contact with other heated appliance.   

  In order to avoid electric shock, do not immerse supply cord, plug or other parts into water.   

  In order to avoid fire or explosion, combustibles (curtains, cloth, wallpaper and others),  

packaging and aerosols should be removed from the vicinity of the appliance.

  Do not place paperboard, plastic or other similar items in the oven. When the oven is not  

being used, everything should be removed except provided accessories. 

  Do not cover the drip tray or other parts with foil since it can result in overheating.   

  In order to avoid electric shock, never use a wire brush to clean the oven since pieces of 

metal can touch live parts.   

  Turn off and unplug the oven when it is not going to be used for an extended period. 

  The oven has an impact resistant, safety glass door which can resist more impact than 

common glass. If the toughened glass is shattered, other parts may have sharp edges. 
Avoid hand contact with the broken glass and metal edges of the door. Please contact
your local service agent for a replacement door.

  Do not lean on the opened oven door. This may damage the oven, especially in the hinge 

area. The door can bear a maximum weight of 8 kg. 

Technika Service Department must be contacted... 

  If in doubt about the operation of the appliance.

  If in doubt about the soundness of the appliance after removing it from its packaging.

  If the power supply cable has been damaged or needs to be replaced.

  If the appliance requires a service.

  If you need spare parts.

Summary of Contents for T45SOG



















Reviews: