Installation
Fixing to the Wall or Cabinet
Position the rangehood, then mark and drill the holes.
Fix the appliance to the wall or cabinet taking care to align it with
the cabinets.
For various installation types, use screws and screw anchors
suited to the type of wall (e.g. reinforced concrete, plasterboard,
etc.). If the screws and screw anchors are provided with the
product, check that they are suitable for the type of wall on which
the hood is to be fixed.
Check that the power cord is not squashed or damaged and
power point is easily accessible by the customer.
Make sure ductwork is connected correctly and not squashed or
damaged.
When set to Recirculating mode, ensure the charcoal filters are
fitted, the large front rail is attached and the lever (see below) is
set to Recirculating- air mode.
NOTE: When the charcoal filters are fitted, the suction power will
decrease.
15
Venting lever position
Ducted - air mode:
Turn the venting lever
here means venting
outside.
Recirculation -
air mode: Turn the
venting lever here
means recirculation
