Technika TSSUR52S, User Manual

PG 9

INSTALLATION

Assembly and electrical connections must be carried out by authorised personnel.

Electrical Connection

The Range Hood is fitted with a power cord and 3 pin plug. Install the Range Hood so that the 
plug is easily accessible. Plug the 3- pin plug into a properly earthed, 10A general purpose power 
outlet.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a 
similarly qualified person in order to avoid a hazard.

The appliance has been manufactured as a class I, therefore earth cable is necessary.

The connection to the mains is carried out as follow:

  IEC227  North 

America

L = Live 

Brown  

Black   

N = Neutral  Blue   

White   

E = Earth 

Green/Yellow  

Green  

NOTE:

When controlling the rangehood to switch on and off with an electric cooktop, the power point 
may be controlled by an isolation switch in conjunction with the cooktop power.
In this case, the power point for the rangehood must still be accessible by the customer after 
installation.
It is the installer’s responsibility to ensure and any relevant installation standards from the 
Wiring Rules AS/NZS3000 are adhered to.

An omnipolar switch with a minimum aperture of 3mm between contacts, in line with the 
electrical load and local standards, must be placed between the appliance and the network in 
the case of direct connection to the electrical network.