Return to Table of Contents
12
BP122 UG 202108-01
www.technimount.com
SUMMARY OF SAFETY PRECAUTIONS
WARNING/CAUTION/NOTE
Carefully read and strictly follow all Warnings and Cautions listed in this user guide. Servicing and maintenance should
only be done by qualified personnel.
WARNING
9
Always hold the bracket with both hands when you manipulate it.
9
Operate the bracket only as described in this user guide.
9
Do not modify the bracket, or any components of Technimount systems. Modifying the product can cause
unpredictable operation resulting in injury to the patient or operator.
9
It is the responsibility of the operator of the bracket or any of its options, to ensure equipment being used with the
Technimount products meets the installation specifications. Injury may result if non-compatible products are used
with Technimount System products.
9
Do not attempt to operate, install or remove the equipment while mobile. Ensure that installation and removal of
equipment is done while vehicle or aircraft is immobilized.
9
Verify that the bracket is inserted correctly into a mounting system and locked. If equipment is improperly installed
and locked, it can cause the equipment to fall and cause injury to the patient or operator and/or damage to the
medical equipment.
9
Never use the bracket if not properly installed and locked on a base, a cot/stretcher, or on a wall mount or floor
mount. If not installed properly, the medical device could fall during transport and may cause injury to the patient
or operator and/or damage to the product.
9
Do not allow untrained staff to assist in the operation of the mounting system. Untrained technicians/staff can
cause injury to the patient or themselves.
9
Do not place additional equipment or items onto the bracket or mounts other than approved Technimount or
components, as this could damage the product and may result in injury to the patient or operator.
9
Operators must be able to able to safely lift the total weight of the bracket system and medical device.
9
Do not attach restraints to the bracket frame. It may result in damage to the System and/or result in injury to the
patient or operator.
9
Always reposition the equipment with care, avoid any improper pushing or violent manipulation, as it may result in
unbalanced equipment and may cause injury to the patient or operator and/or damage to the product.
9
Improper maintenance can cause injury to patient or operator or damage to the product. Maintain the bracket
and Mounting Systems as described in this user guide. Use only Technimount approved parts and maintenance
procedures. Using unapproved parts and procedures could cause unpredictable operation and/or injury and will
void the product warranty.
9
Failure to properly clean or dispose of corrosive products will increase the risk of premature damage and may
cause injury to the patient or operator.
9
Any installation on a surface, wall or on the structure of the vehicle has to be validated or inspected in order to
ensure it maintains the integrity of the vehicle.
